Replacing Timer Knob for Whirlpool Washing Machines

Appliance Repair:

- Washers
Whirlpool
Sears Kenmore
- Dryers
- Dishwashers
- Refrigerators
- Ovens, Ranges
- Cooktops
- Microwaves
- Trash Compactors

- Reading diagrams
- Error codes

Appliance Info:

- Model tag search
- Sears prefixes

Enter your
model number

Whirlpool Washer Repair

Appliance repair > Washers > Whirlpool Washer > Replacing timer knob

READ THIS FIRST!
Warning! To avoid personal injury or death, always unplug the appliance or disconnect the power before attempting any repairs. Always turn off the gas at the source before repairing any gas appliance. Always wear safety glasses when using tools. Keep loose clothing and hair away from any moving parts. Safety is of major importance when performing any service or repair on any electrical appliance. By reading this page you state that you have read and agreed to RepairAve.com's Disclaimer and Terms of Use.

Replacing timer knob
Whirlpool® washing machines (direct drive)

Replacing timer knob

Instructions	Illustrations
To remove the timer knob, push it in first, then turn the knob to the left. To put the knob back on the timer, put it on the timer shaft and turn it to the right until tight. Related info: To find the right replacement timer knob for your washer, click here.

- Troubleshooting guide

- How washers work
- Removing washer cabinet (Taking your washer apart)
- Replacing timer knob
- Testing/Replacing water level switch
- Testing/Replacing water inlet valve
- Replacing water inlet hoses
- Repairing agitator problems
- Replacing drive block
- Checking/Replacing water pump
- Testing/Replacing motor switch
- Checking/Replacing motor drive coupling
- Testing/Replacing washer drive motor

If your problem is not listed, try this site.

Find your part:


		Appliance information center. Free repair help and troubleshooting.